Business Marketing Plan

Commercial and Industrial Air Handling Units

February 27, 2011

NISCO Co. offers various types of commercial and industrial Makeup Air Systems for large industrial ventilation needs. Improving the environment in industrial facilities can produce significant benefits in terms of increased production, fewer errors, and reduced complaints and absenteeism among employees. Air conditioners for air intakes and Space Applications of pressure have the following characteristics: – exit temperature is usually followed by a sensor mounted at the mouth of the device. – Temperature of the air discharge is fixed at the control panel or remotely via a remote control. – Entry of gas is modulated by a butterfly, actuator and controller. Applications for heating, is a room thermostat to regulate the outlet temperature. On a call for heat, the unit supply air is heated to the maximum permitted satisfied if the room thermostat. Once satisfied, the device is turned off or continue to be operated at a temperature of supply reduction. An override option may also be provided. In this case, the thermostat is provided in addition to the base system. The unit is fully set-fire if the ambient temperature is too low. Direct ignition devices are supplied with a transformer plugs for ignition. The units are controlled with an automatic pilot valve solenoid and a pressure regulator provided small – 20,000 BTU – and a spark ignition transformer for ignition pilot. provide pre-purge the system (by running the blower for some time to a minimum of changes in air volume) before lighting the main burner is not required by the ANSI code, but it is often defined by the user. This should be every time a building, dust or vapors to reach the potential and live together in a unit gas could, then it contains inactive. To ensure safe operation of a system of direct heating with gas, a number of safety interlocks are provided frequently A. shock end of the needle – component must be completely open device before operating it. As Air Guard – near the device is out of the air to prove himself before lighting the burner. C. Flame control – as indicated above. Running unit in case of flame failure. D. reduce high temperature limit – when the unit of gas supply is at its maximum allowable temperature. When the air temperature exceeds the limit, the device turns off. E. High gas pressure switch – Cruise device running against the peaks of the inlet gas pressure to protect. gas pressure low F. Switch – device operates at low inlet pressure detected. Redundant safety device, like a small flame would also be closed to the unit. G. Safety shutoff valve – Meets various entries listed above – shut the gas supply. Return air is often used to direct fire space heating systems. It can be supplied with up to 80% of the fresh air return/20%, according to ANSI standards. Other options include a 50/50 arrangement. “80/20″, the units are configured to modulate from 80% fresh air return/20% to a maximum of 100% outside or fresh air. 50/50 units are generally designed so that the return of 50% Switch / 50% to 100% fresh, fresh, without modulation between the two. All exhaust air must be placed under the burner and not recycled through the burner. This is to prevent the deposition of wastes from the combustion in the building. It also prevents contamination from inside the building rose from the environment by direct flame of fire. The burning of unknown impurities can be a serious security breach or air quality problem and must be avoided. For more information, visit the company web NISCO http://www. Nisco. heat exchange net /. html. Oleg Systems Co. TchechelAir Makeup EngineeringNISCO http://www. Nisco. aircurtain net /. htmlhttp: / / www. Nisco. heat exchanger net /. html

Filed under: Branding Services

Tags: industrial air handling units, industrial makeup